🇵🇱 CELSA „HUTA OSTROWIEC” Sp. z o. o. EN
Materiały
CELSA „HUTA OSTROWIEC” Sp. z o. o. to laboratorium akredytowane przez PCA pod numerem AB 019 (Ostrowiec Świętokrzyski, Polska). Zakres akredytacji obejmuje 22 metody badawcze w obszarach: Materiały. Badane obiekty to m.in.: Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled product…, Złącza spawaneE / Welded jointsE, Wyroby hutnicze walcowane, odkuwki swobodnie kute / Rolled products…, Wyroby hutnicze walcowane / Rolled products. Najczęściej stosowane techniki: Metoda mikroskopii optycznej / Optical microscopy method, Próba rozciągania w temperaturze pokojowej / Tensile test at room t…, Próba głębokiego trawienia / Deep etching test.
W skrócie
- Numer akredytacji: PCA AB 019
- Liczba metod w zakresie: 22
- Rodzajów badanych obiektów: 4
- Stosowanych technik: 13
- Miasto: Ostrowiec Świętokrzyski, Polska
- Numer akredytacji
- AB 019
- Jednostka akredytująca
- PCA
- Adres
- LABORATORIUM BADANIA METALI I POMIARÓW, ul. Samsonowicza 2, 27-400 Ostrowiec Świętokrzyski
- Miasto
- Ostrowiec Świętokrzyski, Polska
Co bada to laboratorium (4)
- Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE — 15 metod
- Złącza spawaneE / Welded jointsE — 4 metody
- Wyroby hutnicze walcowane, odkuwki swobodnie kute / Rolled products, Open die forgings — 2 metody
- Wyroby hutnicze walcowane / Rolled products — 1 metoda
Stosowane techniki badawcze (13)
- Metoda mikroskopii optycznej / Optical microscopy method — 3 metody
- Próba rozciągania w temperaturze pokojowej / Tensile test at room temperature — 3 metody
- Próba głębokiego trawienia / Deep etching test — 2 metody
- Próba rozciągania w podwyższonej temperaturze / Tensile test at elevated temperature — 2 metody
- Próba udarności sposobem Charpy’ego / Charpy pendulum impact test — 2 metody
- Próba zginania / Bend test — 2 metody
- Metoda Brinella / Brinell method — 1 metoda
- Metoda oziębiania od czoła (próba Jominy’ego) / Hardenability test by end quenching (Jominy test) — 1 metoda
- Metoda porównań wg skali wzorców / Comparison method with standard charts — 1 metoda
- Metoda Rockwella / Rockwell method — 1 metoda
- Metoda Vickersa / Vickers method — 1 metoda
- Próba Baumanna / Baumann test — 1 metoda
- Rozszerzenie boczne LE dla próbek udarnościowych z karbem V / Lateral expansion LE for Charpy-V impact specimens — 1 metoda
Lokalizacje laboratorium
- LABORATORIUM BADANIA METALI I POMIARÓW — ul. Samsonowicza 2
- Laboratorium Badania Metali i Pomiarów; Celsa „Huta Ostrowiec” Sp. z o. o. — ul. Samsonowicza 2
Zakres akredytacji — metody badawcze (22)
| Lp. | Przedmiot badań | Metodyka / Parametry | Technika | Dokument odniesienia | |
|---|---|---|---|---|---|
| Laboratorium Badania Metali i Pomiarów; Celsa „Huta Ostrowiec” Sp. z o. o. | |||||
| 1 | Wyroby hutnicze walcowane, odkuwki swobodnie kute / Rolled products, Open die forgings | Stopień zanieczyszczenia wtrąceniami niemetalicznymi / Content of nonmetallic inclusions | Metoda mikroskopii optycznej / Optical microscopy method | DIN 50602:1985 (metoda K i M) | DIN 50602:1985 (K and M method) | |
| 2 | Wyroby hutnicze walcowane, odkuwki swobodnie kute / Rolled products, Open die forgings | Makrostruktura / Macrostructure | Próba głębokiego trawienia / Deep etching test | PN-H-04501:1957 | |
| 3 | Wyroby hutnicze walcowane / Rolled products | Własności mechaniczne: / Mechanical properties: Granica plastyczności Re / Yield strength Re Umowna granica plastyczności Rp / Proof strength, plastic extension Rp Wytrzymałość na rozciąganie Rm / Tensile strength Rm Wydłużenie procentowe po rozerwaniu A / Percentage elongation after fracture A Wydłużenie całkowite procentowe przy największej sile Agt / Percentage total elongation at maximum force Agt Zakres siły / Force range (1,2 - 600) kN |
Próba rozciągania w temperaturze pokojowej / Tensile test at room temperature | PN-EN ISO 15630-1:2019-04 | |
| 4 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Wielkość ziarna / Grain size Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda porównań wg skali wzorców / Comparison method with standard charts | PN-EN ISO 643 | ASTM E112 | |
| 5 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Stopień zanieczyszczenia wtrąceniami niemetalicznymi / Content of nonmetallic inclusions Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda mikroskopii optycznej / Optical microscopy method | ISO 4967 (metoda A i B) | ASTM E45 (metoda A i D) | ISO 4967 (A and B method) | ASTM E45 (A and D method) | |
| 6 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Hartowność / Hardenability Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda oziębiania od czoła (próba Jominy’ego) / Hardenability test by end quenching (Jominy test) | PN-EN ISO 642 | |
| 7 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Makrostruktura / Macrostructure Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba Baumanna / Baumann test | ASTM E1180 | |
| 8 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Makrostruktura / Macrostructure Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba głębokiego trawienia / Deep etching test | ASTM E381 | |
| 9 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Mikrostruktura / Microstructure Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda mikroskopii optycznej / Optical microscopy method | Procedura KL0.3.035 | Procedure KL0.3.035 | |
| 10 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Twardość HBW / HBW hardness Zakres / Range do 650 HBW / to 650 HBW średnica kulki / ball diameter 10mm, 2,5mm Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda Brinella / Brinell method | PN-EN ISO 6506-1 | ASTM E10 | |
| 11 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Twardość HRB, HRC / HRB, HRC hardness Zakres / Range Skala C, Skala B / Scale C, Scale B Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda Rockwella / Rockwell method | PN-EN ISO 6508-1 | ASTM E18 | |
| 12 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Twardość HV / HV Hardness Zakres / Range HV10, HV30 Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Metoda Vickersa / Vickers method | PN-EN ISO 6507-1 | |
| 13 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Własności mechaniczne: / Mechanical properties: Granica plastyczności Re / Yield strength Re Umowna granica plastyczności Rp / Proof strength, plastic extension Rp Wytrzymałość na rozciąganie Rm / Tensile strength Rm Wydłużenie względne A / Percentage elongation A Przewężenie względne Z / Percentage reduction of area Z Zakres siły / Force range (1,2 - 600) kN Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba rozciągania w temperaturze pokojowej / Tensile test at room temperature | PN-EN ISO 6892-1 Metoda B | ASTM A370 | ASTM E8/E8M | PN-EN ISO 6892-1 B method | |
| 14 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Podatność do odkształceń plastycznych / Ability to undergo plastic deformation Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba zginania / Bend test | PN-EN ISO 7438 | ASTM E290 | |
| 15 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Własności mechaniczne: / Mechanical properties Granica plastyczności Re / Yield strength Re Umowna granica plastyczności Rp / Proof strength, plastic extension Rp Wytrzymałość na rozciąganie Rm / Tensile strength Rm Zakres siły / Force range (1,2 - 250) kN Zakres temperatur / Temperature range (36 - 900) °C Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba rozciągania w podwyższonej temperaturze / Tensile test at elevated temperature | PN-EN ISO 6892-2 Metoda B | PN-EN ISO 6892-2 B method | |
| 16 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Praca łamania / Absorbed energy Zakres / Range KV2, KV8, KU2, KU8 Początkowa energia młota / Initial potential energy of the testing machine 300J, 450J Zakres temperatur / Temperature range (od -180 do +180) °C / (from -180 to +180) °C Udarność (z obliczeń) / Impact strength (from the conversion) Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba udarności sposobem Charpy’ego / Charpy pendulum impact test | PN-EN ISO 148-1 | ASTM A370 | ASTM E23 | |
| 17 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Temperatura przejścia w stan kruchy FATT / Fracture Appearance Transition Temperature FATT Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 148-1 | SEP 1670 | ASTM A370 | ||
| 18 | Wyroby hutnicze walcowane, odkuwki swobodnie kuteE / Rolled products, Open die forgingsE | Udział przełomu plastycznego SFA / Shear fracture appearance SFA Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Rozszerzenie boczne LE dla próbek udarnościowych z karbem V / Lateral expansion LE for Charpy-V impact specimens | PN-EN ISO 148-1 | ASTM A370 | ASTM E23 | |
| 19 | Złącza spawaneE / Welded jointsE | Własności mechaniczne: / Mechanical properties Granica plastyczności Re / Yield strength Re Umowna granica plastyczności Rp / Proof strength, plastic extension Rp Największa siła Fm / Maximum force Fm Wytrzymałość na rozciąganie Rm / Tensile strength Rm Zakres siły / Force range (1,2 - 600) kN Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba rozciągania w temperaturze pokojowej / Tensile test at room temperature | PN-EN ISO 6892-1 Metoda B | PN-EN ISO 4136 | PN-EN ISO 6892-1 B method | |
| 20 | Złącza spawaneE / Welded jointsE | Własności mechaniczne: / Mechanical properties Granica plastyczności Re / Yield strength Re Umowna granica plastyczności Rp / Proof strength, plastic extension Rp Największa siła Fm / Maximum force Fm Wytrzymałość na rozciąganie Rm / Tensile strength Rm Zakres siły / Force range (1,2 - 250) kN Zakres temperatur / Temperature range (36 - 900) °C Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba rozciągania w podwyższonej temperaturze / Tensile test at elevated temperature | PN-EN ISO 6892-2 Metoda B | PN-EN ISO 4136 | PN-EN ISO 6892-2 B method | |
| 21 | Złącza spawaneE / Welded jointsE | Praca łamania / Absorbed energy Zakres / Range KV2, KV8, KU2, KU8 Początkowa energia młota / Initial potential energy of the testing machine 300J, 450J Zakres temperatur / Temperature range (od -180 do +180) °C / (from -180 to +180) °C Udarność (z obliczeń) / Impact strength (from the conversion) Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba udarności sposobem Charpy’ego / Charpy pendulum impact test | PN-EN ISO 9016 | PN-EN ISO 148-1 | |
| 22 | Złącza spawaneE / Welded jointsE | Podatność do odkształceń plastycznych / Ability to undergo plastic deformation Obszar regulowany: E – Elastyczny zakres akredytacji. Elastyczność zakresu obejmuje elementy wskazane w dokumencie DA-10 dla zakresu akredytacji laboratoriów badawczych / Flexible scope of accreditation. Flexibility of the scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. Lista działań prowadzonych w ramach elastycznego zakresu akredytacji jest udostępniana publicznie lub na żądanie przez akredytowany podmiot / A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Próba zginania / Bend test | PN-EN ISO 5173 | |
Normy referencyjne (34)
ASTM A370
ASTM E10
ASTM E112
ASTM E1180
ASTM E18
ASTM E23
ASTM E290
ASTM E381
ASTM E45 (A and D method)
ASTM E45 (metoda A i D)
ASTM E8/E8M
DIN 50602:1985 (K and M method)
DIN 50602:1985 (metoda K i M)
ISO 4967 (A and B method)
ISO 4967 (metoda A i B)
PN-EN ISO 148-1
PN-EN ISO 15630-1:2019-04
PN-EN ISO 4136
PN-EN ISO 5173
PN-EN ISO 642
PN-EN ISO 643
PN-EN ISO 6506-1
PN-EN ISO 6507-1
PN-EN ISO 6508-1
PN-EN ISO 6892-1 B method
PN-EN ISO 6892-1 Metoda B
PN-EN ISO 6892-2 B method
PN-EN ISO 6892-2 Metoda B
PN-EN ISO 7438
PN-EN ISO 9016
PN-H-04501:1957
Procedura KL0.3.035
Procedure KL0.3.035
SEP 1670